For many years there seemed to be one efficient way for you to keep info on a personal computer – working with a hard disk drive (HDD). Nevertheless, this type of technology is currently displaying it’s age – hard disks are really loud and slow; they are power–ravenous and are likely to create a great deal of warmth in the course of intensive operations.
SSD drives, on the contrary, are swift, take in significantly less energy and are also much cooler. They offer an exciting new solution to file access and data storage and are years ahead of HDDs when it comes to file read/write speed, I/O performance and power capability. Find out how HDDs fare up against the newer SSD drives.
1. Access Time
With the arrival of SSD drives, data access rates have gone tremendous. On account of the brand–new electronic interfaces made use of in SSD drives, the common data access time has shrunk towards a record low of 0.1millisecond.
HDD drives count on spinning disks for data storage reasons. When a file will be utilized, you need to await the right disk to reach the right position for the laser beam to reach the data file involved. This translates into an average access rate of 5 to 8 milliseconds.
2. Random I/O Performance
The random I/O performance is important for the performance of any data file storage device. We’ve executed extensive testing and have established an SSD can deal with at the very least 6000 IO’s per second.
Throughout the exact same trials, the HDD drives demonstrated to be significantly slower, with only 400 IO operations handled per second. Even though this may seem like a good deal, if you have a busy server that hosts loads of well–liked web sites, a slow hard disk can cause slow–loading sites.
The lack of moving elements and rotating disks in SSD drives, and also the current advances in electronic interface technology have resulted in a significantly risk–free file storage device, with an average failure rate of 0.5%.
With an HDD drive to work, it has to spin a pair of metallic disks at a minimum of 7200 rpm, holding them magnetically stabilized in the air. They have a large amount of moving elements, motors, magnets along with other devices crammed in a tiny space. Therefore it’s no surprise the average rate of failure of the HDD drive ranges between 2% and 5%.
4. Energy Conservation
SSD drives work virtually silently; they don’t generate surplus heat; they don’t call for additional cooling down solutions and also take in much less electricity.
Trials have established that the average electric power usage of an SSD drive is amongst 2 and 5 watts.
HDD drives can be notorious for being loud; they are more likely to overheating and whenever you have several hard drives inside a server, you will need an extra a / c unit exclusively for them.
In general, HDDs use up in between 6 and 15 watts.
5. CPU Power
SSD drives permit swifter file access speeds, which will, consequently, encourage the processor to finish data file queries much quicker and afterwards to go back to different duties.
The common I/O hold out for SSD drives is barely 1%.
By using an HDD, you will have to invest more time awaiting the outcomes of one’s data query. This means that the CPU will continue to be idle for additional time, awaiting the HDD to respond.
The common I/O wait for HDD drives is about 7%.
6.Input/Output Request Times
The bulk of uGottaHost.com’s completely new machines moved to solely SSD drives. Each of our tests have established that having an SSD, the typical service time for any I/O request although performing a backup continues to be under 20 ms.
During the very same tests with the exact same web server, this time fitted out using HDDs, performance was much reduced. During the hosting server back–up procedure, the regular service time for I/O demands varied between 400 and 500 ms.
7. Backup Rates
Referring to back–ups and SSDs – we’ve spotted an exceptional progress with the back–up rate as we turned to SSDs. Now, a normal web server data backup requires simply 6 hours.
On the other hand, with a server with HDD drives, an identical back up normally takes three or four times as long to complete. An entire back up of an HDD–equipped web server normally takes 20 to 24 hours.
To be able to automatically enhance the performance of your respective sites and not having to adjust any kind of code, an SSD–driven website hosting service is really a excellent solution. Look at the cloud hosting services packages and additionally the VPS services – these hosting solutions offer really fast SSD drives and can be found at affordable prices.
- Live Demo
- Each of our Virtual Private Servers is configured for you at zero cost. 99.9% network uptime. Full root and SSH access.
Compare our prices
- Review the instruments and parameters offered by our Virtual Private Servers. You could start off with a cheaper VPS configuration and move up with just a mouse click as your demands grow.
- Compare our hosting plans
- Contact us around the clock by email or by utilizing uGottaHost.com’s super–fast ticketing platform. Our technicians are going to answer all of your requests within just 1 hour.